25
Insert / remove an SD memory card
■ Insert an SD memory card
➀ Slide the SD memory card cover to the arrow
direction to open the cover
➁ Insert an SD memory card fully into the SD
memory card slot, and then push the memory
card straight into the slot until a click is heard
• Insert the SD memory card with the label facing the
bottom side of the camera until it makes a clicking
sound.
• After the SD memory card has been inserted, press the
SD ON/OFF button with a tip of the ball point pen, and
make sure the SD MOUNT indicator is connubially lit.
• If you do not press the SD ON/OFF button after insert-
ing the SD memory card, the SD MOUNT indicator is
automatically lit approximately 5 minutes later.
➂ Shut the SD memory card cover
➀ Place the camera upside-down, push the left of the Panasonic logo plate on the front
panel to unlock the SD memory card cover, and pull it out a little.
➁Slide the SD memory card cover to the arrow direction to open the cover
SD memory card cover
SD memory card slot (SD)
Panasonic
logo plate
➀ ➁
* Label facing
bottom side
SD memory card cover
To Next Page
Loading...
