[Sequence]
Using a maximum of 4 cropping outlines, determine whether or not to operate the sequence from the following
settings. The sequence operates in the order of the numbers assigned to the cropping outlines.
Off/5s/10s/20s/30s
• Default: Off
[Set] button
Applies the cropping, camera action on alarm, home area, self return time, and sequence settings.
IMPORTANT
• The cropping outline may move out of alignment when the “Image capture mode” setting is changed.
Make sure to check the cropping outline after changing the “Image capture mode” setting.
• The cropping outline may move out of alignment when the “Zoom/Focus adjustment” setting is
changed. Make sure to check the cropping outline after changing the “Zoom/Focus adjustment” setting.
• The alignment of the cropping outline displayed during configuration might be slightly changed after
the [Set] button is clicked.
• "Sequence" is unavailable when “H.264(all)” is selected for “Cropping”.
• "Alarm action" is unavailable when “H.264(all)” is selected for “Cropping”.
Operating Instructions 137
14 Configure the settings related to advanced view [Advanced view]
To Next Page
Loading...
