Panasonic WV-SP105

24
Important:
 • Besuretousethepowercordplug(accessory)providedwiththisproduct.
 • Besuretofullyinsertthepowercordplug(accessory)intothe12VDCpowersupplyterminal.
Otherwise, it may damage the camera or cause malfunction.
 • Mountthecamerasothatexcessiveforceisnotappliedtothepowercord.
 • BesuretouseanACadaptor compliant with the Specifications regarding power source and
power consumption (
☞ p.29).
●
When using PoE (IEEE802.3af compliant)
Connect a LAN cable (category 5 or better, straight) between a PoE device (such as a hub) and the
network connector of the camera.
Important:
 • Useall4pairs(8pins)oftheLANcable.
 • Themaximumcablelengthis100m{328'}.
 • MakesurethatthePoEdeviceinuseiscompliantwithIEEE802.3afstandard.
 • When connecting both the 12 V DC power supply and the PoE device for power supply,
12 V DC power supply will be used for power supply.
 • WhentheLANcableisdisconnectedonce,reconnectthecableafteraround 2 seconds. When
the cable is quickly reconnected, the power may not be supplied from the PoE device.