Panasonic WV-SP305

29
Configure the network settings
Install the software
Before installing the software, read the readme file on the provided CD-ROM first.
Software included on the provided CD-ROM
 • PanasonicIPsettingsoftware
Configure the network settings of the camera. Refer to the following for further information.
 • ViewerSoftware"NetworkCameraView 4"
It is necessary to install the viewer software "Network Camera View 4" to display images on a
PC. Install the viewer software by double-clicking the "nwcv4setup.exe" icon on the provided
CD-ROM.
Configure the network settings of the camera using the
Panasonic IP setting software
It is possible to configure the network settings of the camera using the IP setup software on the
provided CD-ROM.
When using multiple cameras, it is necessary to configure the network settings of each camera
independently.
If the Panasonic IP setting software does not work, configure the network settings of the camera
and the PC individually on the "Network" page of the setup menu. Refer to the Operating
Instructions (PDF) for further information.
Important:
 • WhenusingMicrosoft Windows Vista, the "Windows Security Alert" window may be displayed
when starting the IP setup software. In this case, disable "User Account Control" from the con-
trol panel.
 • Forthesecurityenhancement,theMACaddress/IPaddressofthecameratobeconfiguredwill
not be displayed when around 20 minutes have passed after turning on the power of the cam-
era. (when the effective period is set to "20min only" in the Easy IP setup)
 • PanasonicIPsettingsoftwareisinoperableinothersubnetsviathesamerouter.
 • ThiscameracannotbedisplayedorsetwithanolderversionoftheIPsetupsoftware(version
2.xx).