11.12 Configure the settings relating to the privacy
zone (Privacy zone setup menu)
Click the [Setup>>] button of “Privacy zone” on the [Image quality] tab of the “Image/Audio” page.
(®page 92)
When there is a zone that you do not want to display, set the zone as a privacy zone not to be displayed. Up
to 2 privacy zones (8 privacy zones
) can be set.
[Area]
The privacy zone will be set when an area is designated by dragging the mouse. Each zone can be overlapped.
Privacy zones 1 and 2 (1-8
) can be created and they will be numbered in the order of creation.
[Display type]
Select a display type of the privacy zone from the following.
• Gray: The privacy zones will be displayed in gray.
• Mosaic
: The privacy zones will be displayed with a mosaic effect.
• Off: Does not display the privacy zones.
• Default: Off
Note
• Set the privacy zone larger than the size of an object to be hidden.
[Close] button
Click this button to close the “Privacy zone” setup menu.
126 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]
To Next Page
Loading...
