IMPORTANT
• When entering the host name for “NTP server address”, it is necessary to configure the DNS settings
on the [Network] tab of the “Network” page. (®page 163)
[NTP port]
Enter a port number of the NTP server.
• Available port number: 1 - 65535
• Default: 123
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 161, 162, 443
*1
, 995, 10669, 10670
[Time adjustment interval]
Select an interval (1 - 24 hours: in 1 hour intervals) of synchronization with the NTP server.
• Default: 1h
[Time zone]
Select a time zone corresponding to the location where the camera is in use.
• Default: (GMT) Greenwich Mean Time: Dublin, Edinburgh, Lisbon, London
*1
To Next Page
Loading...
