3. Click the [Start] button to start recording images on the SD memory card. The SD recording status indicator
will light red (®page 12) while images are being recorded on the SD memory card.
The image saving interval can be configured on the [SD memory card] tab of the “Basic” page.
(®page 53)
4. Click the [Stop] button to stop saving images on the SD memory card.
5. Click the [Close] button to close the window.
Note
• Image data saved on Drive B can be obtained by executing “Access img.” on the “SD memory card”
tab and logging in from the user authentication window (®page 61).
The destination to save image data is a fixed directory on Drive B. Refer to “Directory structure of drive
B” (®page 219).
• When the [Start] button is clicked immediately after the [Stop] button is clicked, saving of images may
not start. In this case, click the [Start] button again.
Operating Instructions 27
3 Record images on the SD memory card manually (SW355, SW352, SF346, SF342, SF336, SF335, SF332, SW316L,
SW316, SP306, SP305, SP302, SW155, SW152, NP502, NW502S, SW115)
To Next Page
Loading...
