1.3 mega pixel (VGA) [4:3] H.264(1) QVGA/VGA/1280x960
H.264(2) QVGA/VGA
1.3 mega pixel (800x600) [4:3] H.264(1) QVGA/800x600/1280x960
H.264(2) QVGA/800x600
1.3 mega pixel [16:9] H.264(1) 320x180/640x360/1280x720
H.264(2) 320x180/640x360
3 mega pixel [4:3] H.264(1) QVGA/VGA/1280x960
H.264(2) QVGA/VGA
3 mega pixel [16:9] H.264(1) 320x180/640x360/1920x1080
H.264(2) 320x180/640x360
• Default:
– H.264(1): 1280x960
– H.264(2): VGA
[Transmission priority]
Select a transmission priority for H.264 images from the following.
• Constant bit rate: H.264 images will be transmitted with the bit rate selected for “Max bit rate (per
client) *”.
• Frame rate: H.264 images will be transmitted with the frame rate selected for “Frame rate*”.
• Best effort: In accordance with the network bandwidth, H.264 images will be transmitted with the bit rate
varying between the maximum and minimum bit rates that are set for “Max bit rate (per client)*”.
• Default: Frame rate
Note
• When “Frame rate” is selected for “Transmission priority”, number of users who can access the camera
may be limited more (may become less than 10).
[Frame rate*]
Select a frame rate for H.264 images from the following.
1fps/ 3fps/ 5fps*/ 7.5fps*/ 10fps*/ 12fps*/ 15fps*/ 20fps*/ 30fps*
• Default: 30fps*
Note
• When “Frame rate” is selected for “Transmission priority”, this setting is available.
• “Frame rate*” is restricted by “Max bit rate (per client)*”. For this reason, the frame rate may be lower
than the specified value when any value marked with an asterisk (*) is selected.
82 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]
To Next Page
Loading...
