Panasonic WV-SW158

• When “On” is selected for both of the alarm image transmission function and the FTP periodic image
transmission function, the alarm image transmission function will be given priority over the FTP periodic
image transmission function. For this reason, images may not be transmitted at the exact designated
interval or period if alarms occur frequently.
• Select “FTP error” for “Save trigger” on the [SD memory card] tab when using the FTP periodic
transmission function.
Note
• When “FTP error” is selected for “Save trigger” on the [SD memory card] tab, images that have failed
to transmit using the FTP periodic image transmission can be saved automatically on the SD memory
card. (®page 26)
FTP periodic image transmission
[FTP >>]
When “FTP >>” is clicked, the [FTP] tab of the “Server” page will be displayed. (®page 132)
[FTP periodic image transmission]
Select “On” or “Off” to determine whether or not to transmit images using the FTP periodic image transmission
function.
When “On” is selected, it is necessary to configure the settings of the FTP server. (®page 132)
• Default: Off
[Directory name]
Enter the directory name where the images are to be saved.
For example, enter “/img” to designate the directory “img” under the root directory of the FTP server.
• Available number of characters: 1 - 256 characters
• Unavailable characters: " & ;
• Default: None (blank)
[File name]
Enter the file name (name of the image file to be transmitted) and select the naming option from the following.
• Name w/time&date: File name will be [“Entered file name” + “Time and date (year/ month/ day/ hour/
minute/ second)” + “Serial number (starting from 00)”].
• Name w/o time&date: File name will be the characters entered for “File name” only. When “Name w/o
time&date” is selected, the file will be overwritten each time a file is newly transmitted.
• Available number of characters: 1 - 32 characters
Operating Instructions 165
17 Configuring the network settings [Network]