Panasonic WV-SW158 - Page 59

[Format]
To format the SD memory card, click the [Execute] button.
IMPORTANT
• Before formatting the SD memory card, it is necessary to select “Use” for “SD memory card” on the
[SD memory card] tab of the “Basic” page (®page 51) and “Off” for “FTP periodic image
transmission” on the [FTP img. trans.] tab of the “Network” page (®page 165).
• Use the SD memory card after formatting it using the [SD memory card] tab. If using the SD memory
card that has not been formatted on the [SD memory card] tab, the following functions may not work
correctly.
– Save/obtain images that failed to transmit to the FTP server using the FTP periodic image
transmission function
– Save/obtain alarm images
– Save/obtain images saved manually
– Save/obtain images in accordance with the schedule settings
– Save/obtain the alarm logs, the manual/schedule logs, the FTP error logs and the system logs
– Save/obtain images recorded using the SD memory recording function of Panasonic network disk
recorder
– Play/download images on the SD memory card
• When an SD memory card is formatted while another user is in operation, the operation will be
canceled.
• It is impossible to access the SD memory card during the process of formatting.
• All data saved on the SD memory card will be deleted when the SD memory card is formatted.
• Do not turn off the power of the camera during the process of formatting.
• When the setting of “Recording format” has been changed, it is recommended to format the SD memory
card.
• After formatting the SD memory card, available size may be smaller than the total size since the default
directory is automatically created in the SD memory card.
• Recommended SD memory card (SD Speed Class 4 or higher)
Manufactured by Panasonic (option)
– SDXC memory card: 64 GB
– SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB
– SD memory card: 2 GB (except miniSD card and microSD card)
• Use an SD memory card formatted compliant with the SD memory card standard at the default.
SD memory card images
[Access img.]
Images on the SD memory card can be obtained. Click the [Execute] button. Refer to page 60 for how to
access images.
*1
When “H.264(1)” or “H.264(2)” is selected for “Recording format”, the image capture size that can be selected depends on the image
capture size selected for “H.264(1)” or “H.264(2)” in the [JPEG/H.264] tab of the “Image/Audio” page. (®page 78)
Operating Instructions 59
10 Configure the basic settings of the camera [Basic]