[Level]
Adjust the fog compensation level.
The level of fog compensation will increase when the cursor is moved in the “+” direction, and decrease when
the cursor is moved in the “-” direction. Click the [Reset] button to reset to the default setting.
Default: 64
[Close] button
Click this button to quit the “Image adjust” setup menu.
11.6.2 Set mask areas
When “Off” is selected for “Super Dynamic(SD)” and “Back light compensation (BLC)”, it is possible to
compensate for backlight by masking brighter areas.
108 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]
To Next Page
Loading...
