17.2 Configure the HTTPS settings
Click the [Network] tab on the “Network” page. (®page 48, page 50)
The settings relating to the HTTPS protocol that can enhance the network security by encrypting the access
to cameras on this page.
The HTTPS settings will be configured in the following procedure.
Generation of the CRT key (SSL encryption key)
Con figuration of the connection protocol
Access to the cameras using the HTTPS protocol
Application for the approval by CA
(Certi ficate Authority) - Issue of the server certifi cate
Generation of CSR (Certi ficate Signing Request)
Installation of the server certi ficate
Generation of the self-signed certi ficate
When using the server certi ficateWhen using the self-signed certifi cate
Generation of the CRT key (SSL encryption key) (®page 176)
Generation of the self-signed certificate (®page 177)
Generation of CSR (Certificate Signing Request) (®page 179)
Installation of the server certificate (®page 180)
Configuration of the connection protocol (®page 181)
Operating Instructions 175
17 Configuring the network settings [Network]
To Next Page
Loading...
