Note
• Set the privacy zone larger than the size of an object to be hidden.
To raise the precision of the privacy zone placement especially when the zoom is on the “Wide” side,
it is recommended to set the privacy zone with the zoom range between 1x and 3x.
• Panning, tilting and zooming operations can also be carried out on the [Image/Position] tab.
• When selecting “Zone No” after selecting “Gray” for “Privacy zone”, a mask will be displayed in the
image display area and will start blinking while changing its color as follows: Dark gray ® Clear ® Light
gray
• Even when “32” is selected for “Number of Privacy zone”, the maximum number of privacy zones that
can be displayed on 1 screen at the same time is limited to 8. Depending on the positions of the
configured privacy zones and the operation of the camera, the privacy zones may be automatically
combined together and displayed as a maximum of 8 privacy zones.
• When the “Number of Privacy zone” setting is changed from “32” to “8”, privacy zones for zones
numbers other than 1-8 are not displayed.
[Zoom] buttons, [Focus] buttons, [Brightness] buttons, Control pad/buttons and [Go] button
Refer to page 9 for descriptions of how to operate these buttons/pad.
[Close] button
Click this button to close the “Privacy zone” setup menu.
126 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]
To Next Page
Loading...
