Note
• When “On” is selected for “H.264 transmission”, the transmission interval may be longer than the set
value when any value with an asterisk (*) on the right is selected.
[Image capture size]
Select the image capture size from the following.
When “2 mega pixel [16:9]” is selected for “Image capture mode”
1920x1080/640x360/320x180
When “1.3 mega pixel [16:9]” is selected for “Image capture mode”
1280x720/640x360/320x180
When “1.3 mega pixel [4:3]” is selected for “Image capture mode”
1280x960/VGA/QVGA
When “16:9” is selected for “Aspect ratio”
1280x720/640x360/320x180
When “4:3 (VGA)” is selected for “Aspect ratio”
1280x960/VGA/QVGA
When “4:3 (800x600)” is selected for “Aspect ratio”
1280x960/800x600/QVGA
• Default:
– 1920x1080
– 1280x720
Operating Instructions 161
15 Configure the settings relating to the authentication [User mng.]
To Next Page
Loading...
