EasyManua.ls Logo

Panasonic WV-SW598

Panasonic WV-SW598
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Functions Outline of functions
C Refresh control Press the dial key “5” or the [Manual Refresh] button to refresh the camera
images.
Press the [Auto Refresh] button to refresh the images from the camera in
5-second intervals.
When the dial key “5” or the [Manual Refresh] button is pressed again, the
refresh mode of the camera will return to manual refresh.
IMPORTANT
Transmission will be periodically performed when “Auto Refresh” is
selected for the camera image. Confirm the contract plan of the
cellular phone in use before using this function.
Depending on the cellular phone in use, “Auto Refresh” may be
unavailable.
D Resolution control Changes the image capture size by pressing the dial key “0”.
SW598
SW598
SC588
SC588
Image in the aspect ratio of “4:3”
Changes the image capture size
between 320x240 (default) and
640x480.
Image in the aspect ratio of
“16:9”
Changes the image capture size
between 320x180 (default) and
640x360.
SW397
SC387
Image in the aspect ratio of
“4:3 (VGA)”
Changes the image capture size
between 320x240 (default) and
640x480.
Image in the aspect ratio of
“4:3 (800x600)”
Changes the image capture size
between 320x240 (default) and
640x480.
Image in the aspect ratio of
“16:9”
Changes the image capture size
between 320x180 (default) and
640x360.
E Image quality
control
It is possible to change the image quality between “Quality1” and
“Quality2”. (®page 87)
F Home position
*2
The camera will move to the home position (®page 96). Home position
will be displayed only when home position is set.
G Preset
*2
The camera will move to the designated preset position to display images
by pressing the dial key corresponding to the desired channel. (The dial key
numbers are not displayed for Preset No 5 or greater. Only preset IDs will
be displayed for them.) (®page 111)
H AUX control
*2
Controls the AUX terminal.
These buttons will be displayed only when “AUX output” is selected for
“Terminal 3” on the setup menu. (®page 135)
20 Operating Instructions
2 Monitor images on a cellular phone/mobile terminal

Table of Contents

Other manuals for Panasonic WV-SW598

Related product manuals