Note
• When “Recording format” is set to “H.264(1)” or “H.264(2)”, “Save logs” is set to “On” or “Off” depending
on the setting of “Save trigger”.
• Schedule saving is available only when “H.264(1)” or “H.264(2)” is selected for “Recording format”.
FTP error
Perform the settings for the FTP error log list.
Select “On” or “Off” and designate the destination folder in the same manner as for “Alarm”.
• Default: On
IMPORTANT
• When “Name w/o time&date” is selected for “File name” on the [FTP img. trans.] tab on the
“Network” page, FTP error log and associated images will not be saved. To save them, select “Name
w/time&date”. (®page 196)
Note
• When “H.264(1)” or “H.264(2)” is selected for “Recording format”, “FTP error” is unavailable.
80 Operating Instructions
10 Configure the basic settings of the camera [Basic]
To Next Page
Loading...
