[Aspect ratio]
Configure the aspect ratio. When the aspect ratio is 4:3, configure it to use either VGA or 800x600 as “VGA”
and “800x600” cannot be used at the same time.
4:3 (VGA)/4:3 (800x600)/16:9
• Default: 16:9
IMPORTANT
• The positions of areas may move out of alignment if the “Aspect ratio” setting is changed when the
mask area setting (®page 108) is configured. Therefore we recommend that you configure the mask
area setting after configuring the “Aspect ratio”.
Note
• When “On” is selected for “VIQS” and the setting value for the aspect ratio is changed from “4:3” to
“16:9”, make sure that the VIQS setting value does not exceed the maximum designated range.
86 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]
To Next Page
Loading...
