User Manual For Cyclone LC Programmers 9
1 INTRODUCTION
PEmicro's Cyclone LC production programmers are powerful, fast, and feature rich in-circuit
programming solutions. PEmicro offers two models which have the same feature set and only vary
by the devices supported.
Part# CYCLONE-LC-ARM supports a wide variety of ARM Cortex devices.
Part# CYCLONE-LC-UNIV supports those ARM Cortex devices as well as the following NXP
device families: Kinetis, LPC, S32, MPC55xx-57xx), MPC5xx/8xx, DSC, S12Z, RS08, S08, HC08,
HC(S)12(X), ColdFire, and STMicroelectronics’ SPC5 & STM8.
Note: PEmicro refreshed Cyclone names and part numbers in July 2019. The part numbers listed on
earlier Cyclones will differ slightly. CYCLONE is now called Cyclone LC, however the hardware
has not changed.
Figure 1-1: Cyclone LC Supported Architectures
Cyclone LC programmers are designed to withstand the demands of a production environment.
They are Stand-Alone Programmers (SAP) that can be operated manually or used to host
automated programming. In manual SAP mode the Cyclone is operated using the touchscreen
LCD Menu and/or the Start button. Host-controlled SAP mode, for automated programming, is
accomplished using the Cyclone Control Suite.
1.1 Cyclone Feature Comparison
In addition to Cyclone LC programmers, PEmicro offers Cyclone FX programmers that include
enhanced speed, storage, and security features, plus advanced Cyclone control/automation
features which make them an incredibly powerful and versatile solution. See CHAPTER 16 -
CYCLONE FEATURE OVERVIEW / COMPARISON for a CYCLONE feature overview and
comparison with the Cyclone FX programmers.
1.2 Advanced Feature Licenses
PEmicro offers Cyclone LC users the flexibility to add many of the advanced security, automation/
control, and expandable memory features included with the Cyclone FX. These features can be
added by purchasing and installing the appropriate activation license.
1.2.1 ProCryption Security License
The ProCryption Security License offers two extremely valuable security features:
To Next Page
Loading...