User Manual For Cyclone LC Programmers 49
Figure 6-1: Cyclone Image Creation Utility
6.1.1 Specify CPU Manufacturer
The user should select the manufacturer of their target device from the drop-down list.
Cyclone LC programmers support ARM Cortex devices from several manufacturers, including
NXP’s Kinetis and LPC devices. For a complete index of PEmicro-supported ARM Cortex devices,
please view pemicro.com/arm.
If you are using PEmicro Part# CYCLONE-LC-UNIV, this Cyclone also supports these 8-16/32-bit
architectures: NXP’s S32, ColdFire® V2/V3/V4, ColdFire+/V1, MPC5xx/8xx, MPC55xx-57xx,
DSC, ARM® Nexus (MAC7xxx), S12Z, HC(S)12(X), HCS08, HC08, and RS08 devices, as well as
STMicroelectronics’ SPC5 & STM8 (w/ adapter) devices.
Figure 6-2 shows the Specify CPU Manufacturer drop-down box. The options are:
• ARM-based (All Manufacturers)
• NXP
• STMicroelectronics
To Next Page
Loading...