Pandigital PAN7000DW User Manual

27
mode throughout the weekend. The following Monday morning, the
DPF would resume operation at 8:30am.
1. On the
CALENDAR/CLOCK screen, press MENU.
2. Select
Set Schedule.
3. Use
to move between the fields and to change the
field values in
Weekdays On/Off.
4. To set the
Weekends On/Off, select the Enable Weekends
Schedule
button, and then use to access the settings.
5. Use
to move between the fields and to change the
field values in
Weekends On/Off.
6. When correct times are set, select
Done to return to the previous
screen.
Disable Schedule
After the schedule has been set (per above instructions), you can
disable the schedule whenever desired.
1. On the
CALENDAR/CLOCK screen, press MENU.
2. Select
Set Schedule, and then select the Enable Weekdays
Schedule
or Enable Weekends Schedule button. The time fields
will display
OFF.
3. Select
Done.
4. Press
EXIT to return to the previous screen.
Run the Schedule
After the schedule times have been set (per above instructions), you
will use the
Run Schedule function whenever you want the schedule
to take effect.
There are two methods for running the schedule, either from a
slideshow or from the
CALENDAR/CLOCK screen.
CAUTION: After you select the Run Schedule function, any user
intervention will cancel the activation (i.e., pressing
remote or control button, powering off) and the schedule
will not take effect until you select this function again to
re-activate.

Pandigital PAN7000DW Specifications

General

Brand	Pandigital
Model	PAN7000DW
Category	Digital Photo Frame
Language	English