28
Run Schedule from Slideshow
1. Start a slideshow and press ENTER to select the Run Schedule
button when it appears in the lower left corner of the screen
(approx 10 sec).
2. To run the schedule when the
Run Schedule button is no longer
displayed, restart your slideshow and then press
ENTER to select
the
Run Schedule button when it appears.
3. The DPF will go into stand-by mode according to the schedule,
and when it resumes operation, the slideshow will again begin
to play.
Run Schedule from CALENDAR/CLOCK Screen
1. On the CALENDAR/CLOCK screen, press MENU.
2. Select
Run Schedule.
3. The DPF will go into stand-by mode according to the schedule,
and when it resumes operation, the
Calendar/Clock screen will
again be displayed.
A small timer clock will appear indicating the schedule is active,
and then the DPF will operate according to the set schedule.
Set Date and Time
1. On the CALENDAR/CLOCK screen, press MENU.
2. Select
Set Date/Time, and then select the options and use
to change the field values.
3. Select
Done.
4. Press
EXIT to return to the previous screen.
Set Alarm
You can use your DPF as an alarm clock when desired. You can set
the frequency of the alarm, and set the alert to sound the built-in tone
or play your music file.
1. On the
CALENDAR/CLOCK screen, press MENU.
To Next Page
Loading...
Need help?
General
