zone (–127 – max threshold of tag’s detection, 0 – minimus threshold).
TAG MOTION SENSOR SENSITIVITY – setting of built-in accelerometer
sensitivity in immobilizer tag. Set sensitivity is from 0 to 7. Level 0 is lowest
sensitivity level, 7 is the highest one.
When there is no movement, immobilizer tag will proceed to energy
saving mode, stopping information sending via radio channel. Power saving
mode is canceled when motion is detected.
NOTIFICATION ABOUT DISCHARGED BATTERY – voltage threshold
when there is notification about tag’s immobilizer discharged battery.
Software update
Base unit software update.
Download base unit software update to the phone. In ‘PANDECT BT’ app
enter ‘Update software’ menu and set ‘Downloader’ mode. ‘Downloader’
mode will prompt you to select software downloaded earlier, select the
software and download it to the unit.
WARNING!
TO UPDATE SOFTWARE VIA MOBILE APP, ALLOW ACCESS
TO THE PICTURES AND MULTIMEDIA FILES ON YOUR DE
VICE FOR ‘PANDECT BT’ APP.
Device selection
This function is intended to proceed between pairing devices, to search a
new device, to delete the device from phone’s memory.
WARNING!
MANUFACTURER RESERVES THE RIGHT TO CHANGE DE
SIGN AND FUNCTIONALITY OF THE MOBILE APP.
To Next Page
Loading...
