tag’s battery level). The immobilizer base unit can be mounted in the wiring
of the car.
Position of the base unit should be changed if radio range between tag
and base unit is insufficient (rotate, or select another installation location).
WARNING!
DO NOT CONNECT THE SYSTEM TO THE WIRING OF AN
OTHER CAR TYPE OR TO A VOLTAGE DIFFERENT FROM 12V.
WARNING!
DO NOT EXCLUDE FUSES THAT ARE NOMINALLY PROVID
ED IN SECURITY SYSTEM WHEN CONNECTING TO THE CAR
WIRING.
WARNING!
DO NOT CONNECT SECURITY SYSTEM THAT HAS DAM
AGED OUTPUT CABLES.
WARNING!
TO INSTALL THE SYSTEM COMPONENTS, SELECT PLACES
THAT EXCLUDE THEIR MECHANICAL DAMAGE OR AGGRES
SIVE LIQUIDS AND WATER SEEPING ON THEM.
WARNING!
IMMOBILIZER IS A MAINTENANCEFREE DEVICE. DO NOT
DISASSEMBLE THE BODY. IN CASE OF FAILURE, REPAIR
SHOULD BE PERFORMED IN AUTHORIZED WORKSHOPS.
To Next Page
Loading...
