Pantech Marauder - Bluetooth Settings

33
STARTER MODE l BASIC OPERATION
Using Bluetooth tethering
1 Tap Apps from the Home Screen and tap Settings > Wireless &
network.
2 Tap More > Tethering & mobile hotspot.
3 Tap Bluetooth tethering. Now you can provided other devices
Internet connection.
Bluetooth settings
1 Tap Apps from the Home Screen and tap Settings > Wireless &
network.
2 Tap Bluetooth.
3 Tap OFF on the top of the screen to activate. The icon turns orange
when the function is on.
4 Tap your device name on the top of the screen to let other people
pair their devices with the Marauder
TM
.
Setting Visibility Timeout
1 Tap
B
and tap Visibility timeout, while in the Bluetooth setting
screen.
2 Select and tap the time for timeout. Your device will not be
discovered by other device after the time.
Sharing a picture using Bluetooth
1 Tap Apps from the Home Screen and tap Media > Gallery. Or
swipe the screen to the right to access the Favorites panel and tap
Gallery.
2 Select and tap a picture to share.
3 Tap
and tap Bluetooth. Remember that Bluetooth must be on, or
you will receive the pop-up.
4 Select and tap a device among those paired with the Marauder
TM
. The
other party will receive a message to accept the file.
Note To check received files through Bluetooth, tap and tap
Show received files, while in the Bluetooth setting screen.
Renaming the device
1 Tap Apps from the Home Screen and tap Settings > Wireless &
network.
2 Tap Bluetooth.
3 Tap OFF on the top of the screen to activate. The icon turns orange
when the function is on.
4 Tap
B
and tap Rename Phone.
5 Enter a new name and tap Rename.