Pantech Marauder - Messaging

STARTER MODE l CALL & MESSAGES
40
Adding new information to existing contact
1 Tap Phone from the Home Screen.
2 Enter a telephone number and tap Save in the middle of the screen.
3 Select and tap a contact to add information.
4 Enter additional information as needed for the contact.
5 Tap Add another field to add another field for the contact. Select field
names and tap OK.
6 Tap Save.
Messaging
Sending a new message
1 Tap Messaging from the Home Screen.
2 Tap
on the top-right side of the screen.
3 Enter a mobile phone number or email address in the To: field. As you
type, matching contacts appear. You can tap a suggested contact or
continue typing. Or tap
and tap Contacts, Recent calls, or Group.
4 Enter a message in the Type to compose field.
5 Tap Send.
Note A failed message remains in the list. To delete it, tap and hold
the message and tap Delete.
Sending a new message using the shortcut key
1 Slide open the QWERTY keypad.
2 Press
.
3 Enter a mobile phone number or email address in the To: field.
4 Compose a message.
5 Tap Send.
Entering a message using voice
1 Tap Messaging from the Home Screen.
2 Tap
on the top-right side of the screen.
3 Enter a mobile phone number or email address in the To: field. As you
type, matching contacts appear. You can tap a suggested contact or
continue typing. Or tap
and tap a contact.
4 Tap the Type to compose field. Tap
in the virtual keyboard and
speak your message.
5 Tap Send.
Note This function is not supported on the QWERTY keypad.
Entering text using the virtual keyboard
1 Tap Messaging from the Home Screen.
2 Tap
on the top-right side of the screen.
3 Enter a mobile phone number or email address in the To: field. As you
type, matching contacts appear. You can tap a suggested contact or
continue typing. Or tap
, and tap a contact.