Pantum BP5100DN Series User Manual

101
10.3.3. Updating the optional tray status
Each time you install/remove the optional trays, you need to manually update the printer driver
status.Take Windows 7 as an example for this section.
1. Install the printer driver (please refer to “How to install Windows printer driver” for installation).
2. Enter the “Start menu” - “Control panel” - view “Device and Printer”.
3. Right-click the printer icon and select “Printer Properties” in the pull-down menu.
4. Enter the “Auxiliary Settings” option. to set the corresponding configuration options.
5. Click “Refresh Now-Check Printer” - “OK/Apply” to update the printer status.

Pantum BP5100DN Series Specifications

General

Print Technology	Laser
Duplex Printing	Automatic
Monthly Duty Cycle	80, 000 pages
Connectivity	USB 2.0, Ethernet
Paper Input Capacity	250 sheets
Multipurpose Tray Capacity	50 sheets
Paper Output Capacity	150 sheets
Memory	256 MB
Print Resolution	1200 x 1200 dpi
Media Types Supported	Plain, Recycled, Envelope
Media Sizes Supported	A4, A5, A6, Letter, Legal, Executive
Processor	600 MHz
First Print Out Time	Less than 6.9 seconds
Supported Operating Systems	Windows, macOS, Linux
Print Speed	40 ppm