Pantum BP5100DN Series User Manual

85
9.1.7. Auto shut-off setting
“Auto shut-off setting” to set off condition and off delay of printer.
1. Press "Menu" to enter the Menu Settings interface.
2. Press "OK" to select the "System Setting" option.
3. Press direction key “▲” or “▼” to select options of “Auto off set”, press “OK” to set off condition
and off delay.
Note：
Set auto off condition:
• Shutdown under no-port state (default configuration. : no port is connected, WiFi
function deactivated, printer is under standby or sleep mode.
• Shutdown under idle state: the printer is under standby or sleep mode.
• If auto off condition is satisfied, printer will be off at the preset time.
• After printer is off, power consumption is 0.5W or lower.
• Individual countries (or regions) do not support auto off setting.

Pantum BP5100DN Series Specifications

General

Print Technology	Laser
Duplex Printing	Automatic
Monthly Duty Cycle	80, 000 pages
Connectivity	USB 2.0, Ethernet
Paper Input Capacity	250 sheets
Multipurpose Tray Capacity	50 sheets
Paper Output Capacity	150 sheets
Memory	256 MB
Print Resolution	1200 x 1200 dpi
Media Types Supported	Plain, Recycled, Envelope
Media Sizes Supported	A4, A5, A6, Letter, Legal, Executive
Processor	600 MHz
First Print Out Time	Less than 6.9 seconds
Supported Operating Systems	Windows, macOS, Linux
Print Speed	40 ppm