55
6. Web server
You can manage printer setup via the embedded Web server.
6.1. Visit the embedded Web server
1. Turn on the power of printer and computer.
2. Connect the printer to network to ensure that the printer is connected to the network where the
computer is connected to (please refer to Chapter 4 or Chapter 5 for network setup method).
3. Input the IP address of printer in the address bar of Web browser to visit the Web server
imbedded in printer.
View the IP address of printer via control panel (please refer to Chapter 9.3) or print the “Network
setup page” out to view the IP Address of printer (please refer to Chapter 9.4).
• Windows users are suggested to use Microsoft Internet Explorer 8.0 (or higher version)
or Firefox 1.0 (or higher version), Mac users are suggested to use Safari 4.0 (or higher
version). No matter what kind of browser you are suing, please ensure that JavaScript
and Cookies are always enabled. Please ensure compatibility with HTTP 1.0 and HTTP
1.1 when other network browsers are used.
• If the computer cannot visit the Web server embedded in printer, then your computer
and printer may be connected to different networks. Please inspect your network
environment or consult your network administrator.
4. Click “Log in” option, input user name and password (the default user name is admin and the
initial password is 000000) and click “Log in”.
• For safety reasons, you are suggested to change the default password, which can be
finished in the “User Management” interface.
To Next Page
Loading...
Need help?
General
