12
2.3. Loading Paper
2.3.1. Install the multipurpose feed tray
1. Open the multipurpose feed tray.
2. Slide the paper guide of the multipurpose feed tray to match both sides of the paper. Do not
apply excessive force; otherwise, paper jamming or tilting may occur.
3. Unfold the stack of paper for feeding to avoid jamming or feeding error, place the side of paper
to be printed upwards into the automatic feed tray. The multipurpose feed tray can hold up to 60
pieces of 80g/m² paper.
To Next Page
Loading...
Need help?
General