Pantum BP5100DN Series User Manual

120
The toner does not
adhere to the paper
• The print media does not meet the
usage specifications, for example the
media is damp or too rough, or has
been used previously.
• The inside of the printer is dirty.
• Toner cartridge is damaged.
• The parts inside the printer are
damaged.
Use the printing medium that meets
specifications. For printing on a
special medium, use the multipurpose
feed tray.
• Clean the inside of the printer.
• It is suggested to replace the
original toner cartridge.
Horizontal stripes
• The toner cartridge is not installed
correctly.
• The toner cartridge may be
damaged.
• The parts inside the printer are
damaged.
• Install ink cartridge correctly.
• It is suggested to replace the
original toner cartridge.
Note：
• Failures above can be improved by cleaning or replacing toner cartridge. Please
contact customer services center if the problem can still not be solved.

Pantum BP5100DN Series Specifications

General

Print Technology	Laser
Duplex Printing	Automatic
Monthly Duty Cycle	80, 000 pages
Connectivity	USB 2.0, Ethernet
Paper Input Capacity	250 sheets
Multipurpose Tray Capacity	50 sheets
Paper Output Capacity	150 sheets
Memory	256 MB
Print Resolution	1200 x 1200 dpi
Media Types Supported	Plain, Recycled, Envelope
Media Sizes Supported	A4, A5, A6, Letter, Legal, Executive
Processor	600 MHz
First Print Out Time	Less than 6.9 seconds
Supported Operating Systems	Windows, macOS, Linux
Print Speed	40 ppm