Pantum BP5100DN Series User Manual

37
8. Select “Yes, I want to configurate the printer's wireless network” on the wireless setup window
popped out, and operate according to the prompts to set up the printer to wireless network (please
refer to Chapter 5.1.1 for setup method).
9. The installation software will search the printer automatically after wireless network is configured
successfully. The search process may need some time.
10. Select the printer needs to be connected and click “Next”.
Note:
• If the printer you need to connect is not in the list of printers searched, please click
“Refresh” to search again.
• When the printer IP address changes under printer driver installed with host ID , you can
also directly print without re-installing the driver. If you need to install the printer driver with
the host ID, please check the option "Install the printer in the list with host ID".
• If IP address or host name is added manually, you need to know the IP address of the
printer connected or host name. If they are not made clear, please print the “NetConf Pg”
and view “IP Address” and “Host name” (Please refer to Chapter 9.4).
11. The software installs the driver automatically and the installation process may need some time.
The duration is related to your computer configuration, please wait patiently.

Pantum BP5100DN Series Specifications

General

Print Technology	Laser
Duplex Printing	Automatic
Monthly Duty Cycle	80, 000 pages
Connectivity	USB 2.0, Ethernet
Paper Input Capacity	250 sheets
Multipurpose Tray Capacity	50 sheets
Paper Output Capacity	150 sheets
Memory	256 MB
Print Resolution	1200 x 1200 dpi
Media Types Supported	Plain, Recycled, Envelope
Media Sizes Supported	A4, A5, A6, Letter, Legal, Executive
Processor	600 MHz
First Print Out Time	Less than 6.9 seconds
Supported Operating Systems	Windows, macOS, Linux
Print Speed	40 ppm