Pantum BP5100DN Series User Manual

48
2) macOS system: click "Go" - "Applications" - "Pantum" - "Utilities" - "Wireless Network
Configuration Tool" on the computer Finder menu bar.
2. Use USB cable to connect and configure. Select "Yes, I have an USB cable that can be used for
installation" in the following interface. Click "Next".
2.1 The computer has been connected to wireless network.
1) The currently wireless network currently connected to computer is selected as wireless network
configuration tool by default. Complete configuration according to interface prompt.
Note：
• The SSID you selected should be consistent with the SSID of access point (wireless
router) connected to your computer.

Pantum BP5100DN Series Specifications

General

Print Technology	Laser
Duplex Printing	Automatic
Monthly Duty Cycle	80, 000 pages
Connectivity	USB 2.0, Ethernet
Paper Input Capacity	250 sheets
Multipurpose Tray Capacity	50 sheets
Paper Output Capacity	150 sheets
Memory	256 MB
Print Resolution	1200 x 1200 dpi
Media Types Supported	Plain, Recycled, Envelope
Media Sizes Supported	A4, A5, A6, Letter, Legal, Executive
Processor	600 MHz
First Print Out Time	Less than 6.9 seconds
Supported Operating Systems	Windows, macOS, Linux
Print Speed	40 ppm