EasyManua.ls Logo

Pantum M7100 Series

Pantum M7100 Series
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note:•The SSID you selected should be consistent with the SSID of access point
(wireless router) connected to your computer.
2)
Pleasetick
“No”toconfigure otherwirelessnetworkneededtoconnectto.Complete
configuration accordingto
interfaceprompt.
Note:•At present, the printer supports 3 types of safe modes: none, WEP and WPA/WPA2.
1) None: There is no encryption method used.
2) WEP: Send and receive data via security key by using WEP (Wired Equivalent
Privacy). WEP key is applicable to 64-digit and 128-digit encrypted network and
can contain numbers and letters at the same time.
3) WPA/WPA2: it is the pre-shared key (PSK) of Wi-Fi protected access which
connects wireless device and access point via TKIP or AES encryption (WPS-
Personal). The working length of WPA/WPA2 is within the PSK of 8-63 characters.
Thedisplaypasswordisnottickedbydefault;ifitisticked,allpasswordsinput
can be seen in clear text.
50

Table of Contents

Other manuals for Pantum M7100 Series

Related product manuals