Pantum M7100 Series

2.2 The computer is not connected to wireless network Input the SSID (case sensitive) and
passwordofaccesspoint(wirelessrouter)intheinterfacebelow.Completeconfiguratio 
according to interface prompt.
Note:•If you do not know the SSID of access point (wireless router), please click “Print
Wireless Network Information Page” to view the SSID of the needed access point
(wireless router).
• Iftheprintercannotbeusednormallyafterwirelessnetworksetupisfinished
please install the drive again.
3. Use WPS connection .
Select “No, I don’t have a USB cable” in the interface below and then click “Next”.
51