30 208495 REV B Operations Manual, HPA2, Compact Outdoor SSPA
3.2 Quick Start Cables
For convenience all Compact Outdoor Amplifiers ship with a ‘Quick-Start’ communications
cable. This allows the user to immediately connect the amplifier to a PC and begin operation.
Ethernet ready units ship with a Quick Start cable fitted with a 10-base T connector as shown
in Figure 3-7.
Non Ethernet ready units are shipped with a Quick Start cable fitted with a 9-pin D-sub
connector and are configured for RS-232 communications as shown in Figure 3-8.
Figure 3-7: Ethernet Quick Start Cable, 207755
Figure 3-8: RS-232 Quick Start Cable, 207998
WIRING CHART
CONNECTOR
FROM
CONNECTOR TERMINAL TERMINAL
TO
COLOR AWG LENGTH
To Next Page
Loading...