Operations Manual, HPA2, Compact Outdoor SSPA 208495 REV B 89
9.2 1:2 Redundant Systems
The Compact Outdoor Amplifier can also be configured in 1:2 Redundant Systems. The major
difference being that the amplifier’s internal controller can not be used for system control.
Instead a separate RCP2-1200 Redundant System controller is used to provide system
control. The controller can be remotely located from the amplifiers up to 500 ft. Figures 9-19
through 9-22 show a 1:2 Compact Outdoor Amplifier Redundant System.
Figure 9-19: 1:2 Redundant System
Outdoor Amplifier Frame
RCP2-1200 Indoor Controller
RCP Cable Assembly
Figure 9-20: 1:2 Redundant System Block Diagram
1
3
2
3
2
1
4
4
1
3
2
RF OUT-POL 2
SW2
SW1
RF OUT-POL 1
3
2
1
4
32
1
4
RF Input
RF Input
POL 1
POL 2
PARADISE
DATACOM
RCP2-1200
1:2 REDUNDANT
SYSTEM CONTRO LLER
To Next Page
Loading...