Paradise Datacom 205486 REV F - Compact Outdoor Amplifier in 1:1 Redundancy; Figure 9-4: Typical 1:1 Redundant System Outline

Operations Manual, HPA2, Compact Outdoor SSPA 208495 REV B 77
9.1 Compact Outdoor Amplifier in 1:1 Redundancy
The Compact Outdoor Amplifier is ideally suited for a self-contained and cost effective 1:1
redundant system. Each Compact Outdoor Amplifier has a built-in 1:1 redundant controller.
The controller is activated via computer command from the Teledyne Paradise Datacom
Universal M&C application. The Compact Outdoor Amplifier may be purchased as a
redundant system or upgraded in the field from a single thread amplifier to a 1:1 redundant
system.
A redundancy kit may be purchased separately which includes the following components:
• Mounting Frame
• Waveguide Switch / Mounting Bracket
• Input Splitter
• Waveguide bends from amplifier to switch
• High Power Waveguide Termination
• Coaxial cables from splitter to Amplifier input
• Link Cable
• Switch Cable
Figure 9-4: Typical 1:1 Redundant System Outline
SSPA SYSTEM
C-Band