Operations Manual, HPA2, Compact Outdoor SSPA 208495 REV B 41
3.5 Web-based M&C
The most basic method of communication with the Compact Outdoor SSPA is via a web
browser, which accesses the built-in web pages served from the amplifier’s embedded web
server. Supported web browsers include Internet Explorer version 6 or better, and Mozilla
Firefox version 3.0.3 or better.
Once the host PC has been configured and connected to the amplifier using the Quick Start
cable, the user may open a web browser page, select File → Open, and enter the IP address
of the networked amplifier into the browser’s address field. The default IP address is
192.168.0.9. See Figure 3-18.
Important! In order to use the web browser interface with a SSPA that has
been assigned a custom IP address using the Universal M&C Software,
make sure the IP port address is set to 1007.
The initial page is the launch window, as seen in Figure 3-19. The Java-based web M&C
applet will automatically load in the browser window.
Figure 3-18: Enter IP address for Compact Outdoor SSPA (default is 192.168.0.9)
Figure 3-19: M&C Applet loading into browser window
http://192.168.0.9
To Next Page
Loading...