Operations Manual, HPA2, Compact Outdoor SSPA 208495 REV B 43
Figure 3-22: Communication Settings window descriptions
Select Protocol:
RS232, RS485, IPNet
or SNMP.
Choose Baud Rate:
2400, 4800, 9600,
19200 or 38400
Enter new Read/Write
Community
password; Click
button to change.
Enter relevant
IP Settings
for user’s network;
Click ‘Change IP’
button to change.
Click ‘Read IP’ button
to populate current IP
settings.
Enter a new Web
Password; Click
‘Confirm’ to Change.
• Communication Settings Window: Read/Write listing of adjustable SSPA
communication parameters. All options are selectable. To set a parameter, select
the new value and click the “Change” button with the mouse pointer. See Figure
3-22 for descriptions of the contents of the Status window.
The Communication Settings window displays the prevailing values of the following
parameters:
• Selected Protocol
• Selected Baud Rate
• Current Web Password
• Current SNMP Read/Write Communities
• IP Address; Gateway Address; Subnet Mask; Local Port; IP Lock Address
To Next Page
Loading...