InspectRx200 Operator Guide | 2 - InspectRx Preventative Maintenance Guide | 49
14. Cross off SB3
15.
Install the Dome Grounding Wires for the Upper and Lower Dome.
a. Assemble the ground wires to the Dome. Do this at the location of the two screws as shown
in image. Assemble the washer into the material of the machine so electricity can safely
leave the machine.
16.
The lower Dome needs to be ground wired inside the ZiuZ Inspector. Assemble one end of the
wire to X and the other to Y as shown in image. Again make sure you assemble the washer into
the material of the machine.
To Next Page
Loading...