Parker 650V series - Selecting the Menu Detail; The DIAGNOSTICS Menu

The Keypad 5-3
650V AC Drive
Selecting the Menu Detail
For ease of operation the drive can display full or reduced menus. Refer to Chapter 6 to see how
the setting changes the displayed menu. Additional parameters are indicated with F in the table.
Navigate to the parameter (SET::SETP::ST99) and press the
key. This toggles full
or partial menu detail. The default setting of 0 provides partial menu detail. Set the parameter to
1 to enable full menu view.
The DIAGNOSTICS Menu
Display Name Description
FREQUENCY The current output frequency in Hertz
SPEED SETPOINT The set point as a percentage of MAX SPEED
DC LINK VOLTS
Vac (rms) x √2 = dc link Volts
(when motor stopped)
MOTOR CURRENT The current load value in Amps
To see the following requires detailed menus view to be enabled, see above “Selecting the Menu
Detail”
Display Name Description
INPUTS MENU:
IN
DIn F
DIGIN WORD
IPA1 F
ANIN 1 VALUE
IPA2 F
ANIN 2 VALUE
OUTPUTS MENU:
OUT
dout F
DIGOUT WORD
OPA1 F
ANOUT1 VALUE
OPA2 F
ANOUT 2 VALUE
TRIP HISTORY MENU:
TRIP
TH1 F
TRIP 1 (NEWEST)
TH2 F
TRIP 2
tH3 F
TRIP 3
tH4 F
TRIP 4
tH5 F
TRIP 5
tH6 F
TRIP 6
tH7 F
TRIP 7
tH8 F
TRIP 8
tH9 F
TRIP 9
tH10 F
TRIP 10 (OLDEST)
Lefflersgatan 1, SE-754 50 Uppsala, SWEDEN +46 (0)18-65 70 00 +46 (0)18-10 74 78 info@regal.se www.regal.se