Page 21
The Menu Structure
890CS
The main menu for the 890CS is shown below. The unit will initialise in Remote Mode from factory
conditions. The Keypad will display the Output Power (%). This is the first of five diagnostics.
Welcome Screen
Displays the software version of the unit
From the Welcome Screen, the display times-out (alternatively
you can press the
key) to show the first of 5 diagnostics:
Output Power
As a percentage of nominal full power
for the selected input voltage
Heatsink Temp
The heatsink temperature in Centigrade
Supply Frequency
The real time frequency of the input
supply in Hz
DC Link Volts
Vac (rms) x √2 = dc link Volts (when
motor stopped)
M
time-out
E
Input Current
The real time input current in Amps
To Next Page
Loading...
