Parker 890 - 890 Cs

Page 25
890CS
The unit will initialise in Remote Mode from factory conditions.
The Keypad will display the Output Power (%). This is the first of five diagnostics.
Welcome Screen
Displays the software version of the unit
From the Welcome Screen, the display times-out to show the first of
5 diagnostics:
Output Power
As a percentage of nominal full power for the
selected input voltage
Heatsink Temp
The heatsink temperature in Centigrade
Supply Frequency
The real time frequency of the input supply in
Hz
DC Link Volts
Vac (rms) x √2 = dc link Volts (when motor
sto
pp
ed
)
WELCOME SCREEN
DC LINK VOLTS
SUPPLY FREQUENCY
HEATSINK TEMP
0 degC
OUTPUT POWER
0 %
M
0.0 Hz
0 V
OUTPUT CURRENT
0.0 A
time-out
E
Input Current
The real time input current in Amps