Page 22
890CD
The main menus for the 890CD are shown below. Each menu contains parameters.
NOTE Refer to the Engineering Reference Manual for a list of available parameters.
How to Edit a Parameter
Press to enter the SET::QUICKSETUP menu.
Scroll through the parameters using the
and
keys.
Press
to select a parameter for editing.
Increment/decrement the parameter value using the
and keys.
Press
to exit the parameter.
This is the power-up welcome screen. If a different screen
appears, press E a few times to return to this screen
Press the M key to get to OPERATOR menu
DOWN arrow to get to the DIAGNOSTICS menu
DOWN arrow to get to the QUICK SETUP menu
DOWN arrow to get to the SYSTEM menu
M
time-out
E
To Next Page
Loading...
