Parker IQAN-MC2 - Appendix A; IQAN-MC2 Technical Overview

31
IQAN-MC2 Technical Overview
Appendix A
Instruction book, IQAN-MC2
Appendix A
IQAN-MC2 Technical Overview
System
Parameter Remark
Operating temperature
Absolute maximum temperature
Storage temperature
-40 to 70 °C
-40 to 85 °C
-40 to 100 °C
Voltage supply
Power-on threshold
Over voltage on any pin
Over voltage on USB D+ and D-
Reverse polarity protection on +BAT
9 to 32 V
typ 6.2 V
36 V (with respect to -BAT)
3.5 V
with external 20A fuse
Power driver load Total load on power drivers <20 A
Current supply
V
BAT
=14V
V
BAT
=28V
typical 200 mA
typical 160mA
Current supply RTC
+RTC =14V
+RTC =28V
typical 4 mA
typical 8 mA
Start-up time typical 600 ms with small application
System cycle time T
SC
3 to 100 ms
Application flash memory 832 kB
Application RAM memory 832 kB
Data log memory typical 40,000 records
Weight 0.7 kg
Environmental ratings
Parameter Remark
Climate environment
Enclosure, water and dust protection
Salt mist
Damp heat, cyclic
Damp heat, steady state
Heat, operation
Cold
Change of temperature
IEC 60529:2001, IP65; DIN 40050 Part 9:1993, IP6K9K
IEC 68-2-52:1996 Kb, 72 hours
IEC 60068-2-30:2005 Db, +55°C, 95% RH, 6 cycles
IEC 60068-2-78:2001 Cab, +40°C, 93% RH, 21 days
IEC 60068-2-2:2007 Bb, 70°C, 72 hours
IEC 60068-2-1:1993 Ab, -40°C, 16 hours
IEC 60068-2-14:1984 Nb, -30°C to +55°C, 10x8 hours
Mechanical environment
Random vibration
Shock
IEC 60068-2-64:2008 Fh, 15-250 Hz, 9.7 Grms, 3x10 hours
IEC 60068-2-27:2008 Ea, 40 g. 6 ms, 1000*6 directions
EMC
Radiated emission
Conducted emission
Conducted susceptability
Radiated susceptability
Conducted transients susceptability
ISO 13766:2010/ISO 14982:2009
EN 55025:2003, 0.15-108 MHz
ISO 11452-4:2005, 1-200 MHz, 1 kHz, 80% AM, 150 mA
ISO 11452-2:2004, 200-2000 MHz, 1kHz, 80% AM, 100 V/m
ISO 7637-3:2007, Level 3
ISO 7637-2:2004, Pulse1,2a,2b,3a,3b,4,Level 3,Pulse 5,Level 1
ESD
Operation
Handling
ISO 10605:2008, 8 kV contact, 15 kV air
ISO 10605:2008, 4 kV contact