Parker NitroFlow Lab - Unpacking and Connection

K3.1.142k Manual NitroFlow Lab - 20 -
6.3.3 Pressure switch menu
Access: Touch pressure switch menu button in settings screen (refer to § 6.3)
Function: Set the pressure switch
In the pressure switch menu the levels at which outlet pressure the generator will switch on and off, can be set. To
change the settings, touch the button in front of the text.
Button Selection Result
P-switch Yes Pressure switch is active
P-switch No Pressure switch is not active
Unit on 0-10 Bar*/
0-145 PSI*
Pressure level at which the unit will switch on
Unit off 0-10 Bar*/
0-145 PSI*
Pressure level at which the unit will switch off
*refer to local settings menu
To determine the correct switch on and off pressure, please check §7.4.