10
GB/IE/NI/CY/MT
Failure to do so risks causing a fire or explosion.
Keep the device in a dry location and out of the reach of children
when it is not being used.
CAUTION! HOW TO AVOID DAMAGE TO THE DEVICE
AND ANY HARM TO PERSONS THAT MAY RESULT FROM
SUCH DAMAGE:
Only cut materials which are suitable for this device. Not complying
with this may cause damage to the device and expose the user to
a risk of injury.
Do not work with damaged, incomplete devices or those which have
been modified without the approval of the manufacturer. Before using
the device, a specialist should carry out a check to make sure that
the electrical protective measures required are in place.
Check the device regularly to make sure it is functioning properly.
Only use original accessories and do not carry out any modifica-
tions to the device.
Please read the instructions in the operating instructions on the
subject of “Maintenance and cleaning”. All additional measures
must be carried out by a qualified electrician. Always contact our
service point if you need any repairs.
ELECTRICAL SAFETY:
CAUTION! How to avoid accidents and injuries from electric
shock:
When operating the device, the mains plug must be freely accessible
once the device is installed.
Before you start using the device, get the power supply professionally
checked:
– Earthing, zeroeing, residual current protection circuit must meet
the safety regulations of the energy supply company and be
working perfectly,
– Protection of the electrical plug connections against moisture.
RISK OF ELECTRIC SHOCK:
Make sure that the mains voltage matches the details on the rating
plate.
Carry out the electrical installation in accordance with the national
regulations.
Before each use, check the device mains cable and mains plug
for damage. Defective mains cables must not be repaired, instead
they must be replaced with new ones. Have any damage to your
device repaired by an authorised specialist.
Do not use the mains cable to unplug the mains plug from the
socket. Protect the mains cable from heat, oil and sharp edges.
To Next Page
Loading...
