EasyManua.ls Logo

Parkside PHD 170 D2 - Page 33

Parkside PHD 170 D2
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
MT
33
be directed at persons,
animals, active electrical
equipment or the device
itself.
Do not direct the jet at
yourself or others to
clean clothing or shoes.
If you come into con-
tact with cleaning agents,
rinse them with sufficient
clean water.
Never use the power cord
to pull the plug out of
the outlet or to pull the
device. Protect the power
cord from heat, oil and
sharp edges.
Explosion hazard – do
not spray flammable li-
quids.
Do not use the device
near flammable liquids
or gases. There is a risk
of fire or explosion if this
advice is not heeded.
Never transport the
device while the drive is
running.
Switch off the device and
disconnect the plug from
the power outlet. Make
sure that all moving parts
have come to a complete
stop
when leaving the
device,
before changing the ac-
cessories,
before removing ob-
structions or loosening
blockages,
before checking the
device, cleaning it or
performing mainten-
ance work on it.
If the device starts to
vibrate abnormally, an
immediate check is re-
quired, :
search for signs of
damage,
replace damaged parts,
contact the service
centre.
Cleaning, maintenance
and storage
Allow the motor to cool
down before storing the
device for a longer peri-
od.
Replace worn or dam-
aged parts in the in-
terests of safety. Use only
original spare parts and
accessories. Using ex-
ternally produced parts
results in the immedi-

Table of Contents

Related product manuals