EasyManua.ls Logo

Parkside PHD 170 D2 - Page 32

Parkside PHD 170 D2
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
MT
32
FORE IT HAS BEEN DIS-
CONNECTED FROM THE
POWER SUPPLY. Do not
use the device if the cord
is damaged or worn.
If the power cord of this
device is damaged, it
must be replaced by the
manufacturer, their cus-
tomer service or by a
similarly qualified per-
son in order to avoid haz-
ards. contact the service
centre.
Connect the device only
to a power outlet with
a residual current cir-
cuit breaker (FI switch) of
rated residual current no
more than 30mA.
Use only extension cords
that are designed for out-
door use. The connec-
tion must be dry and
routed above the ground.
We recommend using a
cable drum that holds
the power outlet at least
60mm above the ground.
Extension cords must
have a minimum wire
cross section of 2 × 2.5
mm².
High-pressure hoses,
fittings and couplings
are important for device
safety. Only use high-
pressure hoses, fittings
and couplings recom-
mended by the manufac-
turer.
Do not start the device
up if the power cord, wa-
ter supply or other im-
portant parts such as the
high-pressure hose or
spray gun are damaged
or leaky.
Only use the device
standing and on a firm,
level surface.
Never use the device
if there are children or
animals nearby. People
nearby must wear pro-
tective clothing.
Operation
Pay attention, be aware
of what you are doing
and take the utmost care
when working with the
device. Do not use the
device if you are tired or
you are under the influ-
ence of drugs, alcohol or
medication.
High-pressure jets can be
dangerous if used incor-
rectly. The jet must not

Table of Contents

Related product manuals