We recommend you install the lens cap cover when transporting your Parrot Bebop 2 in
order to protect the camera lens.
Installing the propellers
1. Remove the propellers from the packaging and locate the propeller mounting tool.
2. Install the new propellers:
·
place the propellers with a hole in the middle on the motors with a protruding axle
(front right and rear left motors);
·
place the propellers without a hole on the motors without protruding axle (front left
and rear right motors).
3. Lock the propellers with the propellers mounting tool.
4. To change the propellers perform the process in reverse.
To Next Page
Loading...
